Applicable Models

IMPORTANT: This file is only for use with the models identified. Not all models are sold in all countries.

This information is for the following models:

  • FDR-X1000V
  • FDR-X1000VR

About this download

Benefits and improvements

This utility updates the system firmware and provides the following benefits:

  • Allows the camera to record XAVCS format video with an SDHC card in addition to SDXC card.
    Notes:
    • When an SDHC memory card is used to record movies in XAVC S format over extended periods of time, the recorded movies will be divided into files of 4 GB, and the divided files can then be integrated into a single file using the Action Cam Movie Creator or PlayMemories Home software
    • Shooting movies in XAVC S format requires SD Speed Class 10, UHS Speed Class U1, or faster
    • When recording at 100 Mbps or more, UHS Speed Class U3 is required

System Requirements

Operating Systems

  • Windows Vista®
  • Windows Vista® 64-bit
  • Windows® 10
  • Windows® 10 64-bit
  • Windows® 7
  • Windows® 7 64-bit
  • Windows® 8
  • Windows® 8 64-bit
  • Windows® 8.1
  • Windows® 8.1 64-bit

File Info

File Name

  • Update_FDRX1000VV110.exe for LA

File Version

  • 1.10

File Size

  • 219.07 MB

Release Date

  • 04-25-2016

Before You Start


Determine if Your Camera Needs the Update

This update is only for FDR-X1000V cameras that currently have firmware version 1.00. If your camera firmware version is already Version 1.10 or higher, this update is not necessary.

Check the version of your camera firmware:

  1. Power on the camera.
  2. On the camera, press the NEXT or PREV button to select SETUP, CONFIG, and VER., and then press the ENTER button.
  3. If the version number is Ver. 1.10 or higher, the camera does not need this update.

Important Notes

  • This utility is only for use with the Sony® FDR-X1000V cameras. Do not install this utility with any other model.
  • WARNING!!: This firmware update and any changes incurred by it are permanent. It is not possible to return to a previous firmware version after updating this firmware. By continuing this update process and downloading and updating this firmware, you acknowledge that you are aware and understand that this update cannot be reversed.
  • This update process requires the following items for proper updating:
    • A computer with:
      • Available Hard Disk Space: 500 MB or more
      • Installed Memory (RAM): 512 MB or more
      • A USB port.
      • One of the following Microsoft® Windows® operating systems installed:
        • Windows 10
        • Windows 8/8.1
        • Windows 7 (with Service Pack 1)
        • Windows Vista® (with Service Pack 2)
          Note: Starter Edition of Windows Vista is not supported.
    • Camera power supply:
      • This update can only be performed when the remaining battery level has three bars Battery Indicater or more. When performing the firmware update, it's recommended to use a fully charged NP-BX1 rechargeable battery pack.
        WARNING!!: The camera may not operate properly if the power is interrupted during the update.
    • USB cable:
      • Use only the USB cable supplied with the camera.
        IMPORTANT: Update functionality is not guaranteed with any other USB cable.
  • To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
  • It is highly recommended that you print out these instructions for use as a reference during the installation process.

Prepare the Camera for the Firmware Update

  1. Remove the memory card from the camera
  2. Ensure the camera battery is fully charged.

Download & Install


Table of Contents

Download and Update the Firmware

  1. Download the Update_FDRX1000VV110.exe file to a temporary or download directory (please note this directory for reference).
    Note: For Windows 8/8.1 and 10, the default settings for Internet Explorer® will save the file in the Downloads folder. For Windows 10, use File Explorer to locate the Downloads folder, for Windows 8/8.1, click the Desktop tile from the Start screen and then locate the Downloads folder using Windows Explorer.
  2. Go to the directory where the file was downloaded and double-click the Update_FDRX1000VV110.exe file to begin the Firmware Updater.
  3. At the Firmware Updater screen, please follow the instructions.
  4. Connect the camera to your computer using the supplied USB cable and then power on the camera.
    Note: If the message Could not find the camera for this update. appears on the computer display, try disconnecting and reconnection the USB cable or try another USB port on the computer.
  5. Verify that the remove hardware icon Remove Hardware Icon or Remove Hardware Icon is displayed in the task tray at the lower right-hand corner of the computer screen.
  6. After completing the steps above, at the Firmware Updater screen, click Next.
    Firmware Updater Screen
    WARNING!!: Do not power off the camera or disconnect the USB cable until the update process is complete.
  7. At the Firmware Updater screen, click Next.
    camera Connected Screen
  8. When the following screen is displayed, check the version number at the lower left.
    Current Version Screen
    Note: If the current version is 1.10 or higher, your camera does not need this update. Stop the USB connection by clicking the remove hardware icon Remove Hardware Icon or Remove Hardware Icon in the task tray in the lower right corner of the computer screen and then click the Finish button on the Firmware Updater screen. Then power off the camera, briefly remove the battery pack, and then power on the camera again.
    If the current version is 1.00, click Next to continue and perform the firmware update.
  9. The camera is automatically reset and the following Firmware Updater screen appears.
    Click Next Screen
  10. After resetting, the next screen appears and the update starts. The progress bar appears while updating.
    Run the Update Screen
    Note: The update process takes about seventeen minutes to complete.
    WARNING!!: Do not power off the camera or disconnect the USB cable until the update process is complete.
  11. When the update process has been completed, the camera will automatically restart. Make sure the camera is powered on and wait until the LCD screen appears again. When the LCD screen appears, click Finish.
    Update Complete Screen
  12. You may now disconnect the USB cable.

Check the Firmware Version After Updating (optional)

Please follow the steps below to confirm that the firmware was successfully updated:

  1. On the camera, press the NEXT or PREV button to select SETUP, CONFIG, and VER., and then press the ENTER button.
  2. If the version number is Ver. 1.10, the camera firmware was successfully updated.