Article ID : 00196738 / Last Modified : 09/24/2018

Install the Camera Driver Loader on a Computer Using macOS 10.13 High Sierra

Applicable Products and Categories of This Article

IMPORTANTE: Este artigo só se aplica aos produtos e / ou sistemas operacionais específicos. Por favor, consulte a seção de Produtos aplicáveis e recursos para este artigo antes de iniciar estes passos.

For some camera models, the Driver Loader installation is required on a computer using macOS® 10.13 High Sierra operating system before you can update the firmware.

Before You Start

  1. Fully charge the camera battery.
  2. Remove the memory card.
  3. Set your camera USB settings.

    Set USB Connection to Mass Storage.

    Set LUN Setting to Single.

    Set USB Power Supply to Off.

  4. Log in as an administrator on your computer running on macOS High Sierra.
  5. Download your camera's Driver Loader and System Software Updater (firmware). Cheque os Downloads disponíveis para seu modelo.

Install the Driver Loader Software

  1. Double-click the Driver Loader icon to run the software.

  2. Enter the administrator password and click on OK.

    If a pop-up message appears, follow the instructions written on it.

  3. Connect your camera to the USB port of the computer.
    • Your camera screen displays the USB Mode.

  4. On the Driver Loader window, click OK.

  5. Run the camera's System Software Updater.