Article ID : 00109106 / Last Modified : 09/09/2015

How to properly attach the waterproof case to the camera.

Applicable Products and Categories of This Article

IMPORTANTE: Este artigo só se aplica aos produtos e / ou sistemas operacionais específicos. Por favor, consulte a seção de Produtos aplicáveis e recursos para este artigo antes de iniciar estes passos.

Follow these steps to properly attach the waterproof case to the camera.

  1. Slide the buckle lock in the direction of [1] and hold it.
  2. Hold the circled parts and swing out the buckle in the direction of [2].

    buckle

  3. Open the case cover and insert the camera in the case body.
  4. Release the REC or HOLD lock switch on the camera.

    REC or HOLD lock

  5. Insert the tab of the case body into the slot of the case cover.

    case body

  6. Hook the buckle over the tab on the lower part of the case cover [1].
  7. Close the buckle in the direction of [2], until it clicks into place.
  8. Close the buckle until the buckle lock returns to the original position.

    buckle lock