Article ID : 00022930 / Last Modified : 09/30/2014

How to troubleshoot a keyboard not working properly.

Applicable Products and Categories of This Article

Follow these steps to troubleshoot why the keyboard is not working properly.

IMPORTANTE: Este artigo só se aplica aos produtos e / ou sistemas operacionais específicos. Por favor, consulte a seção de Produtos aplicáveis e recursos para este artigo antes de iniciar estes passos.

NOTE: When using a third-party keyboard, refer to the third-party resources for information to properly connect the keyboard.

  1. Turn off the computer.
  2. Remove and re-connect the monitor cable to the LCD port on the back of the computer.Image
  3. Remove and re-connect the keyboard cable to the KEYBOARD port on the base of the LCD monitor.Image

    IMPORTANT: The PS/2 mouse and PS/2 keyboard connections are not interchangeable. Verify that these are connected to the correct ports on the LCD monitor.

  4. Turn on the computer.
  5. Test the keyboard for proper function.
  6. Clean the keyboard .
  7. Turn on the computer.
  8. Test the keyboard for proper function.
  9. Turn off the computer.
  10. If another keyboard is available, substitute that keyboard for the one currently connected.
  11. Turn on the computer.
  12. Test the keyboard for proper function.
  13. Boot to the Recovery CD and verify that the keyboard functions properly.
  14. Remove and re-install the keyboard driver .
  15. Test the keyboard for proper function.
  16. Reset the BIOS defaults .

NOTE: If the issue is still unresolved after completing all of the troubleshooting steps, service may be required.