Article ID : 00013994 / Last Modified : 08/25/2016

The monitor does not turn on when the computer starts.

Applicable Products and Categories of This Article

IMPORTANTE: Este artigo só se aplica aos produtos e / ou sistemas operacionais específicos. Por favor, consulte a seção de Produtos aplicáveis e recursos para este artigo antes de iniciar estes passos.

When you turn on the computer, if the monitor stays black or does not turn on, then it is likely that the incorrect display input source has been selected. On the right side of the monitor, press the INPUT SELECT select button to switch the input from the external HDMI® device to the monitor display source.

Follow this procedure to prevent this issue from happening again in the future:

NOTE: Changing these settings will prompt the computer to auto-search to determine if there is an external input source connected. If not, the monitor will be automatically switched on.

  1. On the right side of the monitor, press the MENU button.

    Image

  2. Use the arrow keys to select the OPTION menu, and then press the OK button.
  3. On the OPTION menu, use the arrow keys to select INPUT SENSING MODE, and then press the OK button.
  4. On the INPUT SENSING MODE menu, use the arrow keys to select AUTO ON, and then press the OK button.
  5. On the right side of the monitor, press the Menu button to exit the on-screen menu.